Artikla trenutačno nema. Dole se možete prijaviti i poslat ćemo vam obaveštenje kad artikal bude opet dostupan. Bićete obavešteni samo za taj artikal.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
TheSPDT Relay(30A) is a high quality Single Pole Double Throw Relay(SPDT).The Relay consist of a coil, 1 common terminal, 1 normally closed(NC) terminal and one normally open(NO) terminal. When the coil of the relay is at rest (not energized), the common terminal and the normally closed terminal have continuity. When the coil is energized, the common terminal and the normally open terminal have continuity. This relay's coil is rated up to 5V and the contact is rated up to 30A (@250VAC, 30VDC). Use it to control AC appliances or high current DC devices.
For all Grove users (especially beginners), Seed studio provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
NOTE: Please exercise great care and safety precautions when working with mains voltages. If in doubt, contact a professional such as a licensed electrician for help.
KEY FEATURES:
- Grove interface compatible
- High Switching Current
- SPDT Relay
- Arduino library ready
- Normally closed relay
TECHNICAL SPECIFICATIONS:
- Operating voltage: 4.75V~5.25V
- Operating current: 185mA
- Switching Voltage: 250VAC/30VDC
- Switching Current: 30A
- Pull-In Voltage(Max): 3.75VDC
- Switch on Time(Max): 15ms
- Release Time(Max): 10ms
- Operating Ambient Temperature: -25~70°C
DOCUMENTS:
Please visit Seeed studio WiKi page for more information about this product. For technical support, please post your questions on their Forum.