Filtri

Poslednje pogledano

BASE SHIELD V2, SEEED 103030000

9,80 €

 

 

- Compatible with lots of Arduino board

- Rich grove connectors

- Same pinout as Arduino Uno R3

- Selectable voltage

- PDF guidance for grove users

 

 

Description:

 

Arduino Uno is the most popular Arduino board so far, however it is sometimes frustrating when your project requires a lot of sensors or Leds and your jumper wires are in a mess. The purpose of creating the Grove – Base Shield is to help you getting rid of bread board and jump wires. With the rich grove connectors on the base board, you can add all the grove modules to the Arduino Uno very conveniently!

 

 

Features:

 

There are intotal 16 grove connectors on the Base Shield, here we use a table to show the details.

 

 

 

Apart from the rich grove connectors, on the board you can also see an RST button, a green LED to indicating power status, ICSP pin, a toggle switch and four row of pinouts. There is no need to explain the RST button and LED, but you really need to know below two features that is very important for your usage.

 

 

1.Power Compatible:

 

Every Grove connector has four wires, one of which is the VCC. However, not every micro-controller main board needs a supply voltage of 5V, some need 3.3V. That's why we add a power toggle switch to Base Shield v2 so that you can select the suitable voltage of the micro-controller main board you are using via this switch.

 

For example, if you are using Arduino UNO with Base Shield v2, please turn the switch to 5v position; while using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3v.

 

 

2.Board Compatible:

 

The pinout of Base Shield V2 is the same as Arduino Uno R3, however Arduino Uno is not the board one that the Base Shield V2 is compatible with, here we listed the boards that we have confirmed that can be used with Base Shield V2.

 

- Arduino Uno

- Seeeduino V4.2

- Arduino Mega / Seeeduino Mega

- Seeduino LoraWan

- Arduino Leonardo / Seeeduino Lite

- Arduino 101

- Arduino Due

- Intel Edison

- Linkit One

 

 

Note

 

If using Base Shield v2 with Seeeduino V3, please solder the pads, P1 and P2.

 

For all Grove users (especially beginners), Seeed Studio provide you guidance PDF documents. Please download and read through Preface - Getting StartedandIntroduction to Grove before your using of the product.

 

 

Documents:

 

Please visit Seeed Studio wiki page for more info about this product. It will be appreciated if you can help them improve the documents, add more demo code or tutorials. For technical support, please post your questions to their forum.

 

 

 

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.