Filtri

Poslednje pogledano

1.75MM SILVER PLA 3D PRINTER FILAMENT, 1KG, RS PRO, 832-0245

  • Zaliha NE
  • Snabdevanje 3 dana
  • Marka: RS PRO
  • Id broj: 1616/
34,74 €

 

 

Product Details

 

RS 3D Printer Filament PLA 1.75mm 1Kg

 

PLA is a tough, easy to use high grade PLA type of filament, ideal for 3D printing. Slightly modified, the filament retains the typical features of PLA, but makes it tougher and less brittle. Due to a low shrinkage factor PLA will not deform after cooling. Poly Lactic Acid is a biodegradable plastic made from renewable natural resources and one of the most popular materials for 3D printing

 

- Tougher and less brittle compared to regular PLA

- Easy to print at low temperature

- Low warping

- Biodegradable

- Limited smell

 

Once you’ve purchased your filament it’s important to store it correctly to maintain its quality. Over time the plastic will absorb moisture from the air, creating small water bubbles in the filament. These bubbles when heated in the extruder nozzle will quickly reach boiling point, spoiling the print. The use of desiccant dehumidifiers to absorb the moisture is highly recommend

 

 

Note

 

Due to its low tendency to warp PLA can also be printed without a heated bed. If you have a heated bed the recommended temperature is ± 35-60˚C.

 

PLA can be used on all common desktop FDM or FFF technology 3D printers.

 

Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly

 

3D Printer Filament

 

Documents:

 

- PLA Data Sheet

- RS Pro Datasheet

 

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.