Filtri

Poslednje pogledano

INDUSTRIAL ISOLATED MULTI-BUS CONVERTER, USB / RS232 / RS485 / TTL COMMUNICATION, WAVESHARE 21411

  • Zaliha NE
  • Snabdevanje 7 dana
  • Marka: WAVESHARE
  • Id broj: 3674/
25,28 €

Industrial Isolated Multi-Bus Converter

Communication between different buses

 
Features At A Glance

The USB/RS232/RS485/TTL Converter is an industrial grade isolated converter that supports USB / RS232 / TTL to RS232 / 485 / TTL, with built-in power supply isolation, digital isolation, and protection circuits like TVS diode. It is easy to use and suitable for industrial control equipments and/or applications with high communication requirement.

  • Adopts original FT232RL for USB communication, fast communicating, stable and reliable, better compatibility
  • Onboard over-voltage, over-current protection circuits (there's no protection between the two power supplies of the host terminal)
  • Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
  • Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption
  • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
  • Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
  • Onboard TTL serial port 3.3V and 5V voltage level switch, allows the user to select TTL level of the Group B terminal
  • Aluminium alloy enclosure with oxidation dull-polish surface, solid and durable
Specifications
PRODUCT TYPE Industrial Isolated Multi-bus USB/RS232/RS485/TTL Converter
DATA RATE 300 ~ 921600bps
300 ~ 600000bps (RS232 to RS232)
GROUP A USB Operating voltage 5V
Connector USB-B
Protection 200mA resettable fuse, isolated output
RS232 Connector DB9 male
Protection TVS protection, surge-suppress, ESD protection
Transmission mode point-to-point
TTL (UART) Operating voltage 5V
Connector screw terminal
Pinout TXD, RXD, GND, 5V
Protection clamping protection diode, over-voltage protection, reverse-proof, shock-resistance, jamproof
GROUP B RS485 Connector screw terminal
Pinout A+, B-, GND
Direction control hardware auto control
Protection lightningproof, surge-suppress, ESD protection
Transmission mode point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
RS232 Connector DB9 male
Protection TVS protection, surge-suppress, ESD protection
Transmission mode point-to-point
TTL (UART) Operating voltage 3.3/5V
Connector screw terminal
Pinout TXD, RXD, GND
Protection clamping protection diode, over-voltage protection, reverse-proof, shock-resistance, jamproof
OPERATING ENVIRONMENT Temperature -25℃ ~ 85℃
Humidity 5%RH ~ 95%RH
OS SUPPORT Windows 11 / 10 / 8.1 / 8 / 7 / XP
NOTE

only one pair of devices will be matched for a complete communication between the Group A and Group B terminals at the same time

Interface Introduction
Multi-Protocol Multi-Bus Conversion

Transmitting data from Group A terminals to Group B

  

Transmitting data from Group B terminals to Group A

 
  • Terminals in the same group cannot communicate with each other.
  • Terminals in the same group cannot send data at the same time, while concurrently receiving is allowed.
Pinout Definition
Operating Status Indicators

3x LED Indicators For Easily Checking Power Connection And Signal TX/RX Statuses

 
Aluminium Alloy Enclosure

Aluminium Alloy Enclosure With Oxidation Dull-Polish Surface,
Solid And Durable, Nice Looking

Outline Dimensions

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.