Filtri

Poslednje pogledano

SEEEDUINO V4.2 SEEED 102010026

  • Zaliha: NE
  • Snabdevanje 7 dana
  • Marka: SEEED STUDIO
  • Id broj: 602/
19,99 €

Seeeduino V4.2 is an Arduino-compatible board, which is based on Atemga328P MCU. There're so many Arduinos and Arduino-compatible boards in the world, and we think that Seeeduino V4.2 is one of the best Arduinos, Seeeduino V4.2 is much more stable, easy-to-use and even good looking.

 

Seeeduino V4.2 is based the Arduino UNO bootloader, and with an ATMEGA16U2 as a Uart-to-USB converter, which means that the board ca basically work like a FTDI chip. You can program the board via a micro-USB cable, if you have an Android phone, you can find a micro-ISB cable easily. Also you can power the board via a DC Jack input, 7 to 15V is acceptable. There's a switch to choose the system supply voltage, 3.3V or 5V, which is very useful if you want to set the system to 3.3V to save power.

 

Finally, the three on-board Grove interface can make your board connect to Groves easily. Want to make something awesome, maybe just a Seeeduino V4.2 and some Groves is enough. 

 

Features:

- ATmega328 microcontroller

- Arduino UNO bootloader

- 14 Digital I/O Pins (6 PWM outputs)

- 6 Analog Inputs

- ISP Header

- Arduino UNO-R3 Shield Compatible

- Micro USB programming and power supply

- 3 on-board Grove connectors

- 3.3/5V system operation power switch

 

Specification:

- 3 on-board Grove connectors

- DC Current per I/O Pin: 40 mA

- DC Jack Input: 7v-12v

- Flash Memory: 32 KB

- RAM: 2 KB

- EEPROM: 1 KB

- Clock Speed: 16 MHz

- Length: 68.6mm

- Width: 53.4mm

- Weight: 26g 

 

 

wiki page

 

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.