Artikla trenutačno nema. Dole se možete prijaviti i poslat ćemo vam obaveštenje kad artikal bude opet dostupan. Bićete obavešteni samo za taj artikal.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Power over Ethernet (PoE) Switch HAT for Raspberry Pi
This Power over Ethernet (PoE) Switch HAT powers your Pi board using ethernet, meaning that there is no need for a power supply.You can plug the HAT right on top of your Pi and start working on your project straightaway. The HAT comes with one ethernet cable plus mounting hardware.
Features & Benefits of the PoE Switch HAT
- Doesn't require use of GPIO pins — great if you want to add on extra boards
- No assembly or soldering needed
- On/off button
- 802.3af (mode A and B) PoE
- Class 0 device
- Fully isolated switched mode power supply (SMPS), 1500 V isolation input to output
- Overload and short circuit protection
- Overtemperature protection
- Up to 87% high effiiciency regulated output
- 36-56 V input voltage
- 5 V output voltage
- 10-1300 mA output power
- 6.5 W maximum output power
- ATtiny 13 A microcontroller for power management