Artikla trenutačno nema. Dole se možete prijaviti i poslat ćemo vam obaveštenje kad artikal bude opet dostupan. Bićete obavešteni samo za taj artikal.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Low power consumption, wide viewing angle, paper-like displaying without electricity.
Features
Standard Raspberry Pi 40PIN GPIO Header is compatible With Raspberry Pi Series Boards, Jetson Nano.
Operating voltage: 3.3V/5V
Interface: 3-wire SPI, 4-wire SPI
Outline dimensions: 170.2 × 111.2 × 1.25mm
Display size: 163.24 × 97.94mm
DOT pitch: 0.1855 × 0.1855mm
Resolution: 880 × 528 pixels
Display color: black, white
Grey scale: 2
Full refresh time: 5s
Refresh power: 50mW (typ.)
Standby current
Viewing angle: >170°
Click here for more information.
VCC |
3.3V/5V |
GND |
Ground |
DIN |
SPI MOSI pin |
CLK |
SPI SCK pin |
CS |
SPI chip selection, low active |
DC |
Data / Command selection (high for data, low for command) |
RST |
External reset, low active |
BUSY |
Busy status output, high active |