Artikla trenutačno nema. Dole se možete prijaviti i poslat ćemo vam obaveštenje kad artikal bude opet dostupan. Bićete obavešteni samo za taj artikal.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
SHIFT REGISTER, 8BIT, 74HC595, DIP16
Shift Register Function: Serial to Parallel
Logic Type: Shift Register
No. of Elements: 1
IC Output Type: Tri State
Logic Case Style: DIP
No. of Pins: 16
Supply Voltage Min: 2V
Supply Voltage Max: 6V
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Packaging: Each
Base Number: 74
IC Generic Number: 74HC595
Logic Function Number: 74595
Logic IC Base Number: 74595
Logic IC Family: HC
Logic IC Function: 8bit Shift Register (3-State)
MSL: -
Operating Temperature Range: -40°C to +85°C
Output Current Max: 7.8mA
SVHC: No SVHC (16-Dec-2013)
Supply Voltage Range: 2V to 6V
8 Bit Shift Register with 3 State Output Register in a 16 Pin PDIP Package
The SN74HC595N device contain an 8 bit serial in, parallel out shift register that feeds an 8 bit D type storage register. The storage register has parallel 3 state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state. Both the shift register clock (SRCLK) and storage register clock (RCLK) are positive-edge triggered. If both clocks are connected together, the shift register always is one clock pulse ahead of the storage register.
8 bit serial-in, parallel-out shift
Wide operating voltage range of 2V to 6V
High current 3 state outputs can drive up To 15 LSTTL loads
Low power consumption: 80?A max.
±6-mA output drive at 5V
Low input current: 1?A max.
Shift register has direct clear
Clock & Timing
Consumer Electronics
Embedded Design & Development