Artikla trenutačno nema. Dole se možete prijaviti i poslat ćemo vam obaveštenje kad artikal bude opet dostupan. Bićete obavešteni samo za taj artikal.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
This is an E-Ink display HAT for Raspberry Pi, 6inch, 1448×1072 high definition, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
SYMBOL | DESCRIPTION |
---|---|
5V | Power input |
GND | Ground |
MISO | SPI MISO pin |
MOSI | SPI MOSI pin |
SCK | SPI SCK pin |
CS | SPI chip selection, low active |
RST | External reset, low active |
HRDY | Busy status output, low active |