Artikla trenutačno nema. Dole se možete prijaviti i poslat ćemo vam obaveštenje kad artikal bude opet dostupan. Bićete obavešteni samo za taj artikal.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller. The Shield features four relays, each relay provides 2 pole changeover contacts (NO and NC); in order to increase the current limit of each output the 2 changeover contacts have been put in parallel. Four LEDs indicate the on/off state of each relay.
Tehnical specifications
Features
Thinker Kit interface | 2x TWI, 2x OUT, 2x IN |
Interfaces with Arduino Board | DIO |
Relays | 4 (60W) |
General
Operating Voltage | 5 V |
Current needs | 140 mA (with all releays on, about 35 mA each) |
PCB Size | 53 x 68.5 mm |
Weight | 0.044 Kg |
Product Code | A000110 |
More information