Artikla trenutačno nema. Dole se možete prijaviti i poslat ćemo vam obaveštenje kad artikal bude opet dostupan. Bićete obavešteni samo za taj artikal.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
10BIT ADC, 2.7V, 8CH, SPI, 16DIP
Resolution (Bits): 10bit
Sampling Rate: 200kSPS
Supply Voltage Type: Single
Supply Voltage Min: 2.7V
Supply Voltage Max: 5.5V
ADC / DAC Case Style: DIP
No. of Pins: 16
Input Channel Type: Pseudo Differential, Single Ended
Data Interface: Serial, SPI
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Packaging: Each
Base Number: 3008
Conversion Time: 10µs
IC Case Style: DIP
Linearity Error ADC / DAC +: 1LSB
MSL: -
No. of Channels: 8
Operating Temperature Range: -40°C to +85°C
SVHC: No SVHC (16-Dec-2013)
Supply Current: 425µA
Supply Voltage Range: 2.7V to 5.5V
Supply Voltage Range - Analogue: 2.7V to 5.5V
Termination Type: Through Hole
8-Channel 10-Bit Analogue to Digital Converter with a SPI Serial Interface
The MCP3008 device is a successive approximation 10-bit analogue-to-digital converter with on-board sample and hold circuitry. It is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Nonlinearity (DNL) and Integral Nonlinearity (INL) are specified at ±1 LSB. Communication with the devices is accomplished using a simple serial interface compatible with the SPI protocol.
10-bit resolution
± 1 LSB max DNL
± 1 LSB max INL
Analogue inputs programmable as single-ended or pseudo-differential pairs
On-chip sample and hold
Low power CMOS technology
Sensing & Instrumentation
Signal Processing
Automation & Process Control