Artikla trenutačno nema. Dole se možete prijaviti i poslat ćemo vam obaveštenje kad artikal bude opet dostupan. Bićete obavešteni samo za taj artikal.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
Za željeni artikal pošaljite poruku/potražnju i kontaktiraćemo vas.
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.
Technical specifications
Microcontroller - ATmega168 or ATmega328
Operating Voltage - 5V
Input Voltage (recommended) - 7-12 V
Input Voltage (limit) - 6-20 V
Digital I/O Pins - 14
PWM Digital I/O Pins - 6
Analog Input Pins - 8
DC Current per I/O Pin - 40 mA
Flash Memory - 16 kB (ATmega168) or 32 kB (ATmega328)
Flash Memory for Bootloader - 2 kB
SRAM - 1 kB (ATmega168) or 2 kB (ATmega328)
EEPROM - 512 bytes (ATmega168) or 1 kB (ATmega328)
Clock Speed - 16 MHz
Links: